Scope
FF OEM solution from Microcyber helps customer develop FOUNDATION fieldbus devices.
This document covers the hardware and software descriptions.
Certification and Technical Services
Foundation fieldbus ITK Pre-Test
Microcyber provides Foundation Fieldbus ITK Pre-Test environment. The FF Interoperability Test is done for the field device at Microcyber prior to theofficial Interoperability Test. Microcyber explains the results and helps to analyze the errors.
Main technical support:
1.Foundation Fieldbus expert guidance
2.Minimized certification period
3.Use of official test tools
Fieldbus Foundation Device Registration
Microcyber provides technical support for the Foundation Fieldbus Interoperability Test (ITK) at the Fieldbus Foundation in Austin, USA for Device Registration purpose.
Main technical support:
1.Foundation Fieldbus professional guidance
2.Request for test offer from Fieldbus Foundation
3.Test order at Fieldbus Foundation
4.Error analysis
Development Schedule Preview: 3 months per device type
Hardware
Shape and size: according to customer’s requirements
CPU: Atmel AT9140800 (ARM7 kernel)
Fieldbus controller: FBC0409
Flash: 512K
RAM: 512K
Power supply: Fieldbus
Power consuming: less than 15mA
Interface with the instrument: UART
Software
Communication with the device: Modbus or required by the customer
Communication Stack: Link Master (LAS capable)
Block instantiation: do not support
Device Description:
Microcyber provides CFF file and compiled DD files according to the device capability and function blocks.
Resource Block: 1
Transducer Block: 1
Function Blocks:
1 PID block
1 AO block
4 DO blocks
2 AI blocks
5 DI blocks
OEM Solution for HART Device
Scope
HART OEM solution from Microcyber helps the buyer develop HART devices.
Microcyber provides the HART communication board customized as customer’s requirements. This solution can upgrade the traditional instrument to HART instrument rapidly. The board supports HART Universal Command, Common Practice Command and analog current output. Microcyber can assist customer in passing certification test of HART with the HCF test system.
Certification and Technical Services
HART Device Registration Pre-Test
Microcyber provides HART Device Registration Pre-Test environment. The HART Physical Layer Test, Slave Data Link Layer Test, Slave Universal Command Test and Slave Common Practice Command Test will be done at Microcyber.
Main technical support:
1.HART expert guidance
2.Minimized certification period
3.Use of official test tools
HART Device Registration
Microcyber provides technical support for the HART Device Registration Test at the HART Communication Foundation in Austin, USA for Device Registration purpose.
Main technical support:
1.HART professional guidance
2.Request for test offer from HART
3.Test order at HART
4.Error analysis
Development Schedule Preview: 3 months per device type
Hardware
Shape and size: according to the buyer
CPU: M430F149
Fieldbus controller: HT1200M
Flash: 60K
RAM: 2K
Power supply: Fieldbus
Power consuming: less than 3.7mA
Interface with the device: UART
Software
Communication with the device: Modbus or required by the buyer
Device Variables: 4 Device Variables
Dynamic Variables: 4 Dynamic Variables
Universal commands: All
Common-practice commands: Optional
Device-specific commands: Custom
Device Description:
Microcyber provides compiled Standard DD files and 475 Field Communicator DD files.
Scope
FF OEM solution from Microcyber helps customer develop FOUNDATION fieldbus devices.
This document covers the hardware and software descriptions.
Certification and Technical Services
Foundation fieldbus ITK Pre-Test
Microcyber provides Foundation Fieldbus ITK Pre-Test environment. The FF Interoperability Test is done for the field device at Microcyber prior to theofficial Interoperability Test. Microcyber explains the results and helps to analyze the errors.
Main technical support:
1.Foundation Fieldbus expert guidance
2.Minimized certification period
3.Use of official test tools
Fieldbus Foundation Device Registration
Microcyber provides technical support for the Foundation Fieldbus Interoperability Test (ITK) at the Fieldbus Foundation in Austin, USA for Device Registration purpose.
Main technical support:
1.Foundation Fieldbus professional guidance
2.Request for test offer from Fieldbus Foundation
3.Test order at Fieldbus Foundation
4.Error analysis
Development Schedule Preview: 3 months per device type
Hardware
Shape and size: according to customer’s requirements
CPU: Atmel AT9140800 (ARM7 kernel)
Fieldbus controller: FBC0409
Flash: 512K
RAM: 512K
Power supply: Fieldbus
Power consuming: less than 15mA
Interface with the instrument: UART
Software
Communication with the device: Modbus or required by the customer
Communication Stack: Link Master (LAS capable)
Block instantiation: do not support
Device Description:
Microcyber provides CFF file and compiled DD files according to the device capability and function blocks.
Resource Block: 1
Transducer Block: 1
Function Blocks:
1 PID block
1 AO block
4 DO blocks
2 AI blocks
5 DI blocks
Microcyber provides the PROFIBUS PA communication board customized as customer’s requirements. This solution can upgrade the traditional instrument to PROFIBUS PA instrument rapidly. The board supports bus communication, control and integration in fieldbus controller, stack, function block and interface circuit. Microcyber can assist customer in passing certification test of PNO and integration test with all kind of DCS system.
Technical Service:
Certification Pre-Test
Microcyber provides Certification Pre-Test environment. The Certification Test is done for the field device at Microcyber prior to the PNO official Certification Test. Microcyber explains the results and helps to analyze the errors.
The success of the Certification Pre-Test shows the PNO official Certification Test will be passed.
PNO Certification test support
Development Schedule Preview: 3 months per device type
Hardware:
? Support Atmel ARM7 series CPU
? Discrete MAU
? Flash ≥256K
? RAM ≥128K
? Support DPV0, DPV1 and PA Profile 3.01
? Support EEROM for data store
? Support asynchrony serial interface, baud rate is changeable
? Support common I/O port
? Power supplier: 9 ～ 32 VDC
Supply power to customer board according to customer’s demand
? Current consumption: ≤ 15mA
? Supply to customer HW: 3V, 10mA or 5V, 6mA
? Support two kind of communication controller
? Smar FB3050
? Microcyber FBC0409
? Intrinsically safety: HW has passed FISCO
? EMC compliance
Software:
? Support function block AI,AO,DI,DO and TOT
? Customized transducer blocks
? EDD File: compliant with SIMATIC PDM 6.0
Microcyber provides the PROFIBUS DP communication board customized as customer’s requirements. This solution can upgrade the traditional instrument to PROFIBUS DP instrument rapidly. The board supports bus communication, control and integration in fieldbus controller, stack, function block and interface circuit. Microcyber can assist customer in passing certification test of PNO and integration test with all kind of DCS system.
Technical Service:
Certification Pre-Test
Microcyber provides Certification Pre-Test environment. The Certification Test is done for the field device at Microcyber prior to the PNO official Certification Test. Microcyber explains the results and helps to analyze the errors.
The success of the Certification Pre-Test shows the PNO official Certification Test will be passed.
PNO Certification test support
Development Schedule Preview: 3 months per device type
Hardware:
? Support ATMEL AT91SAM7SE512 processor, integrate 512K FLASH and 32K RAM
? Use VPC3+C protocol controller
? Support DPV0, DPV1 and DPV2 slave station function
? 19.2k~12M baud rate self-adaption
? DP slave station address setting via DIP switch
? LED status indication: indicates bus and module status
? Selective terminal resistance
? Working temperature: -40~85℃
? Can be customized
? Intrinsically safety: passed FISCO
? EMC compliance
Software:
? Support function block AI,AO,DI and DO
? Customized transducer blocks
? Provide EDD and GSD file
